Help Center

MEWconnect

MEWconnect User Guide

3 min read

1. Create a Wallet

Step 1. Open your MEWconnect app.

Step 2. Click “Create New Wallet”.

Step 3. Pick a strong password.

This step is very important. Make sure you pick a password that is not easy to guess, but also write it down with pen and paper. There is only one other way
to access your wallet, and we’ll get to that soon.

Step 4. Type it again.

Step 5. Click “Start using MEWconnect”.

You’re done! You’ll be taken to a screen that shows your new wallets address backed by a unique color-code. On this screen you’ll find all your ETH and ERC20 tokens. There is also a handy ‘Share’ button next to your address, in case you want to send it to someone.

2. Back it up

Step 1. Select “Back Up” on your wallets homepage.

Step 2. Click “Back Up Now”.

Step 3. Get a pen and paper ready. Then press ‘Start’.

Step 4. Enter in your password to verify you’re you.

Step 5. WRITE DOWN YOUR SEED WORDS.

This is the single most important piece of information about your wallet. These 24 words will decide the future of your funds. Do not lose them, write them down!

Step 6. Pass the seed word check test.

You’re done! All backed up and ready to connect to MEW

3. Connect with MEW

Step 1. Unlock your wallet on MEWconnect.

Step 2. Find a desktop computer. Head to the MEW site.

Check for the SSL certification that states ‘MyEtherWallet Inc [US]’ in the URL. We recommend the Google Chrome browser.

Step 3. Choose the ‘Send Ether & Tokens’ tab.

Step 4. Click ‘MEWconnect’ as the method of access.

Step 5. On the app, click ‘Scan to Connect’.

Step 6. Now use MEWconnect to scan the QR code.

You’re done! You can now use our interface as usual, with the MEWconnect app as your main method of access. Congratulations!

4. Send a Transaction

Step 1. Unlock your wallet on MEWconnect.

Step 2. Connect to the MEW site, as shown above.

Step 3. Follow the process of a regular transaction.

Fill in the ‘To Address’, ‘Amount to Send’, and ‘Gas Limit’ fields. If you have any questions, refer to our article on How to Send a Transaction.

Step 4. Confirm your transaction on the MEWconnect app.

You’re done! Your transaction is broadcasting to the network, and you’ll be able to check it’s status shortly with a provided transaction ID.

5. Overview of the Wallet

Step 1. Where to see tokens.

These can be found at the bottom of the wallet screen. MEWconnect only supports the default list of tokens featured on MyEtherWallet.

Step 2. Where to contact us.

There is an information button in the top-left, that offers a contact resource and other links of interest.

Step 3. Where to buy ETH.

You can purchase ETH in the MEWconnect app by choosing the top-right button labelled ‘Buy Ether’.

Step 4. How to share your address.

You can share your address with anyone you’d like by clicking the arrow button to the right of your address. It will give you different options like text, email, twitter, etc..


To download the MEWconnect app, visit mewconnect.myetherwallet.com.

MEWconnect User Guide

3 min read

1. Create a Wallet

Step 1. Open your MEWconnect app.

Step 2. Click “Create New Wallet”.

Step 3. Pick a strong password.

This step is very important. Make sure you pick a password that is not easy to guess, but also write it down with pen and paper. There is only one other way
to access your wallet, and we’ll get to that soon.

Step 4. Type it again.

Step 5. Click “Start using MEWconnect”.

You’re done! You’ll be taken to a screen that shows your new wallets address backed by a unique color-code. On this screen you’ll find all your ETH and ERC20 tokens. There is also a handy ‘Share’ button next to your address, in case you want to send it to someone.

2. Back it up

Step 1. Select “Back Up” on your wallets homepage.

Step 2. Click “Back Up Now”.

Step 3. Get a pen and paper ready. Then press ‘Start’.

Step 4. Enter in your password to verify you’re you.

Step 5. WRITE DOWN YOUR SEED WORDS.

This is the single most important piece of information about your wallet. These 24 words will decide the future of your funds. Do not lose them, write them down!

Step 6. Pass the seed word check test.

You’re done! All backed up and ready to connect to MEW

3. Connect with MEW

Step 1. Unlock your wallet on MEWconnect.

Step 2. Find a desktop computer. Head to the MEW site.

Check for the SSL certification that states ‘MyEtherWallet Inc [US]’ in the URL. We recommend the Google Chrome browser.

Step 3. Choose the ‘Send Ether & Tokens’ tab.

Step 4. Click ‘MEWconnect’ as the method of access.

Step 5. On the app, click ‘Scan to Connect’.

Step 6. Now use MEWconnect to scan the QR code.

You’re done! You can now use our interface as usual, with the MEWconnect app as your main method of access. Congratulations!

4. Send a Transaction

Step 1. Unlock your wallet on MEWconnect.

Step 2. Connect to the MEW site, as shown above.

Step 3. Follow the process of a regular transaction.

Fill in the ‘To Address’, ‘Amount to Send’, and ‘Gas Limit’ fields. If you have any questions, refer to our article on How to Send a Transaction.

Step 4. Confirm your transaction on the MEWconnect app.

You’re done! Your transaction is broadcasting to the network, and you’ll be able to check it’s status shortly with a provided transaction ID.

5. Overview of the Wallet

Step 1. Where to see tokens.

These can be found at the bottom of the wallet screen. MEWconnect only supports the default list of tokens featured on MyEtherWallet.

Step 2. Where to contact us.

There is an information button in the top-left, that offers a contact resource and other links of interest.

Step 3. Where to buy ETH.

You can purchase ETH in the MEWconnect app by choosing the top-right button labelled ‘Buy Ether’.

Step 4. How to share your address.

You can share your address with anyone you’d like by clicking the arrow button to the right of your address. It will give you different options like text, email, twitter, etc..


To download the MEWconnect app, visit mewconnect.myetherwallet.com.

Customer Support
MEWconnect

MEWconnect User Guide

3 min read

1. Create a Wallet

Step 1. Open your MEWconnect app.

Step 2. Click “Create New Wallet”.

Step 3. Pick a strong password.

This step is very important. Make sure you pick a password that is not easy to guess, but also write it down with pen and paper. There is only one other way
to access your wallet, and we’ll get to that soon.

Step 4. Type it again.

Step 5. Click “Start using MEWconnect”.

You’re done! You’ll be taken to a screen that shows your new wallets address backed by a unique color-code. On this screen you’ll find all your ETH and ERC20 tokens. There is also a handy ‘Share’ button next to your address, in case you want to send it to someone.

2. Back it up

Step 1. Select “Back Up” on your wallets homepage.

Step 2. Click “Back Up Now”.

Step 3. Get a pen and paper ready. Then press ‘Start’.

Step 4. Enter in your password to verify you’re you.

Step 5. WRITE DOWN YOUR SEED WORDS.

This is the single most important piece of information about your wallet. These 24 words will decide the future of your funds. Do not lose them, write them down!

Step 6. Pass the seed word check test.

You’re done! All backed up and ready to connect to MEW

3. Connect with MEW

Step 1. Unlock your wallet on MEWconnect.

Step 2. Find a desktop computer. Head to the MEW site.

Check for the SSL certification that states ‘MyEtherWallet Inc [US]’ in the URL. We recommend the Google Chrome browser.

Step 3. Choose the ‘Send Ether & Tokens’ tab.

Step 4. Click ‘MEWconnect’ as the method of access.

Step 5. On the app, click ‘Scan to Connect’.

Step 6. Now use MEWconnect to scan the QR code.

You’re done! You can now use our interface as usual, with the MEWconnect app as your main method of access. Congratulations!

4. Send a Transaction

Step 1. Unlock your wallet on MEWconnect.

Step 2. Connect to the MEW site, as shown above.

Step 3. Follow the process of a regular transaction.

Fill in the ‘To Address’, ‘Amount to Send’, and ‘Gas Limit’ fields. If you have any questions, refer to our article on How to Send a Transaction.

Step 4. Confirm your transaction on the MEWconnect app.

You’re done! Your transaction is broadcasting to the network, and you’ll be able to check it’s status shortly with a provided transaction ID.

5. Overview of the Wallet

Step 1. Where to see tokens.

These can be found at the bottom of the wallet screen. MEWconnect only supports the default list of tokens featured on MyEtherWallet.

Step 2. Where to contact us.

There is an information button in the top-left, that offers a contact resource and other links of interest.

Step 3. Where to buy ETH.

You can purchase ETH in the MEWconnect app by choosing the top-right button labelled ‘Buy Ether’.

Step 4. How to share your address.

You can share your address with anyone you’d like by clicking the arrow button to the right of your address. It will give you different options like text, email, twitter, etc..


To download the MEWconnect app, visit mewconnect.myetherwallet.com.

MEWconnect User Guide

3 min read

1. Create a Wallet

Step 1. Open your MEWconnect app.

Step 2. Click “Create New Wallet”.

Step 3. Pick a strong password.

This step is very important. Make sure you pick a password that is not easy to guess, but also write it down with pen and paper. There is only one other way
to access your wallet, and we’ll get to that soon.

Step 4. Type it again.

Step 5. Click “Start using MEWconnect”.

You’re done! You’ll be taken to a screen that shows your new wallets address backed by a unique color-code. On this screen you’ll find all your ETH and ERC20 tokens. There is also a handy ‘Share’ button next to your address, in case you want to send it to someone.

2. Back it up

Step 1. Select “Back Up” on your wallets homepage.

Step 2. Click “Back Up Now”.

Step 3. Get a pen and paper ready. Then press ‘Start’.

Step 4. Enter in your password to verify you’re you.

Step 5. WRITE DOWN YOUR SEED WORDS.

This is the single most important piece of information about your wallet. These 24 words will decide the future of your funds. Do not lose them, write them down!

Step 6. Pass the seed word check test.

You’re done! All backed up and ready to connect to MEW

3. Connect with MEW

Step 1. Unlock your wallet on MEWconnect.

Step 2. Find a desktop computer. Head to the MEW site.

Check for the SSL certification that states ‘MyEtherWallet Inc [US]’ in the URL. We recommend the Google Chrome browser.

Step 3. Choose the ‘Send Ether & Tokens’ tab.

Step 4. Click ‘MEWconnect’ as the method of access.

Step 5. On the app, click ‘Scan to Connect’.

Step 6. Now use MEWconnect to scan the QR code.

You’re done! You can now use our interface as usual, with the MEWconnect app as your main method of access. Congratulations!

4. Send a Transaction

Step 1. Unlock your wallet on MEWconnect.

Step 2. Connect to the MEW site, as shown above.

Step 3. Follow the process of a regular transaction.

Fill in the ‘To Address’, ‘Amount to Send’, and ‘Gas Limit’ fields. If you have any questions, refer to our article on How to Send a Transaction.

Step 4. Confirm your transaction on the MEWconnect app.

You’re done! Your transaction is broadcasting to the network, and you’ll be able to check it’s status shortly with a provided transaction ID.

5. Overview of the Wallet

Step 1. Where to see tokens.

These can be found at the bottom of the wallet screen. MEWconnect only supports the default list of tokens featured on MyEtherWallet.

Step 2. Where to contact us.

There is an information button in the top-left, that offers a contact resource and other links of interest.

Step 3. Where to buy ETH.

You can purchase ETH in the MEWconnect app by choosing the top-right button labelled ‘Buy Ether’.

Step 4. How to share your address.

You can share your address with anyone you’d like by clicking the arrow button to the right of your address. It will give you different options like text, email, twitter, etc..


To download the MEWconnect app, visit mewconnect.myetherwallet.com.

Customer Support